One terminal, 2 cables: rebuilding the operator station with FactoryTouch
cables per operator station (11 to 2)
An abrasives manufacturer struggled to deploy operator stations built from touchscreens, barcode readers, authentication readers, and thick clients. Plantformance developed FactoryTouch, an all-in-one Ignition terminal with an atomic operating system. Each station went from 11 cables to 2, an 82% cut, with 80% fewer devices and a 5 min setup.
Key results
- -82% cables per operator station (11 to 2)
- -80% devices per operator position
- 5 min station setup
The problem
Many setups need a touchscreen, a barcode reader, and an authentication reader, all connected to a thick client. Rolling out a large number of these operator positions became hard for the client. Each position meant managing 10+ cables, several suppliers, and many separate parts. Then every station had to be configured and maintained. The more stations the client added, the more time went into purchasing and troubleshooting instead of production.
What it looked like before
Deploying new operator stations meant delays, endless purchase orders across multiple suppliers and parts, and configuration headaches.
How Plantformance solved it
Plantformance developed FactoryTouch, an all-in-one terminal. It cuts each station from 11 cables to 2 (network and power) and from up to 5 devices to 1. Plantformance also rebuilt a full atomic operating system designed for maximum reliability and security. An Ignition module handles easy management of the terminals across the fleet. The terminal is built to do one job: run Ignition applications. Setup takes 5 min per station, and there is no Windows layer to patch or support.
What changed
1 operator station equals 1 terminal with 2 cables and a 5 min setup.
Results
- 82% fewer cables per operator station (11 down to 2)
- 80% fewer devices per operator position
- No more Microsoft Windows on operator stations
- No maintenance required
- Secure by design: the terminal can only run Ignition applications
Plantformance products and services used
Frequently asked questions
What is FactoryTouch?
FactoryTouch is an all-in-one Ignition terminal from Plantformance. It runs a rebuilt atomic operating system, connects with 2 cables for network and power, replaces up to 5 devices with 1, and can only run Ignition applications.
How long does it take to set up a FactoryTouch operator station?
Setup takes 5 min per station. Plantformance provides an Ignition module for easy management of the terminals across the fleet, and there is no Windows layer to patch or support, so no maintenance is required.
Do Ignition operator stations still need Windows?
Not with FactoryTouch. Plantformance removed Microsoft Windows from operator stations. The terminal is secure by design because it can only run Ignition applications, and it requires no maintenance.
Related Ignition case studies
- Purpose-built Linux HMI terminals cut plant-floor OpEx to near zero
- Operator clients live the same day as servers, with TCO down 80%
- Real-time thermal phase tracking for industrial baking ovens
Planning a similar project? Talk to a Plantformance Ignition engineer or browse all 37 Ignition case studies.
Planning a similar Ignition project?
Tell us about your plants and your Ignition setup. A Plantformance engineer will show you how a project like this would work for you.