FactoryBrain Gen 2: 240+ servers deployed with a 99.5% smooth commissioning rate
Gen 2 servers deployed worldwide
Plantformance re-engineered its FactoryBrain server from scratch with client input, implementing 16 of 17 field-identified improvements, including a stronger CPU, more RAM, swappable drives and a modern IPMI stack. The second generation has scaled to 240+ servers deployed worldwide with a 99.5% smooth global commissioning rate, and preconfigured units deploy in 5 minutes.
Key results
- 240+ Gen 2 servers deployed worldwide
- 99.5% smooth global commissioning rate
- 5 min deployment per preconfigured unit
The problem
FactoryBrain 1.0 was reliable for baseline Ignition tasks, but it had limits. A single CPU and a constrained memory ceiling left little headroom for heavier concurrent workloads. First-generation fabrication methods also left room for tighter mechanical tolerances, cleaner internal integration and better overall finish. In the field there were practical gaps too: little extendability, awkward physical access to internal drives, no clear status feedback for local users, and an obsolete IPMI version that complicated on-site troubleshooting and remote out-of-band management.
What it looked like before
Deployments were held back by FactoryBrain 1.0's limited CPU and RAM, minimal extendability, hard-to-reach drives, no local status feedback and an obsolete IPMI version.
How Plantformance solved it
Instead of patching the first design, Plantformance re-engineered the whole server from scratch. The team worked directly with clients to audit field pain points and found 17 potential improvements, then implemented 16 of them. Changes include a stronger primary CPU and more RAM, a second specialized processor, more extendability, redesigned drive access, clear local user feedback and a modern IPMI stack. Every component was vetted down to the silicon level to use the chipset's native high-speed networking, Intel QuickAssist Technology (QAT) and other hardware-accelerated features without adding board complexity.
What changed
Gen 2 ships with swappable drives, modern remote management and an integrated touchscreen for on-site and remote collaboration, preconfigured for a 5-minute deployment with an emergency reconfiguration bypass procedure.
Results
- Scaled to 240+ servers deployed worldwide with zero manufacturing issues
- 99.5% smooth global commissioning rate with zero production downtime
- 16 of 17 client-identified improvements implemented
- Preconfigured units deploy in 5 minutes
- Lower total cost of ownership (TCO), per Plantformance's assessment
Plantformance products and services used
Frequently asked questions
What changed in FactoryBrain Gen 2?
Plantformance worked with clients to audit field pain points, found 17 potential improvements and implemented 16. Gen 2 adds a stronger primary CPU, more RAM, a second specialized processor, more extendability, redesigned drive access, clear local status feedback, a modern IPMI stack and an integrated touchscreen.
How fast can a FactoryBrain Gen 2 server be deployed?
Plantformance ships Gen 2 units preconfigured for a 5-minute deployment, with an emergency reconfiguration bypass procedure. Across 240+ servers deployed worldwide, the second generation holds a 99.5% smooth global commissioning rate.
Related Ignition case studies
- Zero-trust OT security with zero critical pen test findings
- Multi-tier backups with air-gapped tape stored in a bank vault
- Isolated Client Modules: dedicated hardware and zero-trust remote access
Planning a similar project? Talk to a Plantformance Ignition engineer or browse all 37 Ignition case studies.
Planning a similar Ignition project?
Tell us about your plants and your Ignition setup. A Plantformance engineer will show you how a project like this would work for you.